Hochschule Karlsruhe Hochschule Karlsruhe - University of Applied Sciences
Navigation öffnen Navigation schließen
Hochschule Karlsruhe Hochschule Karlsruhe - University of Applied Sciences

Prof. Dr.-Ing. Matthias Stripf

Fakultät für Maschinenbau und Mechatronik
Professor für Thermofluiddynamik und effiziente Energiewandlung

Institut für Thermofluiddynamik
Institutssprecher

Veröffentlichungen

  • Gramespacher C, Stripf M, Bauer H-J (2021): The Influence of Deterministic Surface Roughness and Free-Stream Turbulence on Transitional Boundary Layers : Heat Transfer Distributions and a New Transition Onset Correlation. In: Proceedings of the ASME 2021 Summer Heat Transfer Conference, 16.-18.06.2021, virtual online, https://doi.org/10.1115/HT2021-63504
  • Gramespacher C, Albiez H, Stripf M, Bauer H-J (2021): The Influence of Element Thermal Conductivity, Shape, and Density on Heat Transfer in a Rough Wall Turbulent Boundary Layer with Strong Pressure Gradients. In: Journal of Turbomachinery, 10 pages, https://doi.org/10.1115/1.4050390
    Auch in: Proceedings of the ASME Turbo Expo: Turbomachinery Technical Conference and Exposition, 21.– 25.09.2020, virtual online.
  • Mayle RE, Stripf M (2021): “I-Spots” and Emmons' Spot Production Rate. In: Journal of Turbomachinery, 143(9), 6 pages, https://doi.org/10.1115/1.4051105
    Auch in: Proceedings of the ASME Turbo Expo: Turbomachinery Technical Conference and Exposition, 21.– 25.09.2020, virtual online.
  • Theobald F, Schäfer K, Yang J, Frohnapfel B, Stripf M, Forooghi P, Stroh A (2021): Comparison of Different Solvers and Geometry Representation Strategies for DNS of Rough Wall Channel Flow. In: Proceedings of the ECCOMAS Congress 2020 & 14 th WCCM, 11.-15.01.2021, virtual online, https://doi.org/10.23967/wccm-eccomas.2020.089
  • Gaiser, J, and Stripf, M (2020): lambdaMax - Mess- und Simulationsverfahren für das thermische Verhalten spritzgegossener, wärmeleitfähiger Kunststoffe und Ableitung von Optimierungsstrategien für eine nachhaltige Werkstoff- und Bauteilentwicklung. Abschlussbericht zum FHProfUnt-Projekt, https://doi.org/10.2314/KXP:1759329061
  • Albiez H, Gramespacher C, Stripf M, and Bauer H-J (2019): High Resolution Measurements of Heat Transfer, Near-Wall Intermittency, and Reynolds-Stresses Along a Flat Plate Boundary Layer Undergoing Bypass Transition. In: Journal of Heat Transfer, 12 pages, https://doi.org/10.1115/1.4045756 
    Auch in: Proceedings of the ASME Turbo Expo: Turbomachinery Technical Conference and Exposition, Phoenix, AZ.
  • Gaiser, J, Stripf, M, and Henning, F (2019): Enhanced Transient Hot Bridge Method Using a Finite Element Analysis. In: International Journal of Thermophysics, Vol. 40, https://doi.org/10.1007/s10765-018-2476-y
  • Gramespacher, C, Albiez, H, Stripf, M, and Bauer, H-J (2019): The generation of grid turbulence with continuously adjustable intensity and length scales. In: Experiments in Fluids, Vol. 60, https://doi.org/10.1007/s00348-019-2727-0
  • Kraft, O, Stripf, M, and Hesse, U (2019): Heat and mass transfer in activated carbon composites with artificial macro pores for heat pump applications. In: Adsorption, Vol. 25(6), pp 1121–1133, https://doi.org/10.1007/s10450-019-00077-7
  • Forooghi, P, Stripf, M, and Frohnapfel, B (2018): A systematic study of turbulent heat transfer over rough walls. In: International Journal of Heat and Mass Transfer, Vol. 127, pp. 1157-1168, https://doi.org/10.1016/j.ijheatmasstransfer.2018.08.013
  • Schmid, J, Baisch-Pfitzer, P, Albiez, H, and Stripf, M (2018): Ultrasonic Suction Pump at Vapour Pressure for Condensate Return in a Vibrating Heat Pipe. In: Ultrasonics, Vol. 88, pp. 123-130, https://doi.org/10.1016/j.ultras.2018.03.010
  • von Böckh, P, and Stripf, M (2018): Thermische Energiesysteme : Berechnung klassischer und regenerativer Komponenten und Anlagen. Springer Vieweg, Berlin, https://doi.org/10.1007/978-3-662-55335-0
  • Gaiser, J, Stripf, M, and Henning, F (2018): Finite Element Material Model for the Prediction of the Thermal Conductivity of Highly Filled Polymers. 4th Edition of International Conference on Polymer Science and Technology, 04.-05.06.2018, London, UK, https://doi.org/10.4172/2471-9935-C2-011
  • Kraft, O, Stripf, M, and Hesse, U (2018): Determination of Kinetic Parameters of Porous Adsorbents with Artificial Macro-Pores Using a Pressure Jump / Pressure Drop and a Transient Hot Bridge Method. 8th Pacific Basin Conference on Adsorption Science and Technology, 03.09.-06.09.2018, Sapporo, Japan.
  • Albiez, H, Gramespacher, C, and Stripf, M (2018): Experimentelle Untersuchungen zur laminar-turbulenten Bypass-Transition. In: Forschung aktuell, pp. 38-42.
  • Theobald, F, and Stripf, M. (2018): Direkte Numerische Simulation einer inkompressiblen turbulenten Kanalströmung mit Rauheitselementen und gekoppeltem Wärmeübergang. In: Forschung aktuell, pp. 43-47
  • Kraft, O, and Stripf, M (2017): OptiSorp: Entwicklung von Adsorber-Compounds hoher Leistungsdichte für mobile und stationäre Adsorptionswärmepumpen - Experimentelle Untersuchungen und Entwicklung eines Simulationsmodells. Abschlussbericht zum FHprofUnt-Projekt, https://doi.org/10.2314/GBV:1024755177
  • Albiez, H, and Stripf, M (2017): Development of Transition Models for 3D-CFD in Consideration of Turbulent Length Scales and Surface Roughness : A Sneak Preview on Projekt TRAM3D. NUMECA User Meeting, 25.-26.04.2017, Nürnberg.
  • Kraft, O, and Stripf, M (2017): OptiSorp: Steigerung der Leistungsdichte von Adsorber Compounds für mobile und stationäre Adsorptionswärmepumpen. In: Forschung aktuell, pp. 47-50.
  • Kraft, O, Gaiser, J, Stripf, M, and Hesse, U (2016): Determination of Load Dependent Thermal Conductivity of Porous Adsorbents. In: Proceddings of the COMSOL Conference 2016, 12.-14.10.2016, München.
  • Albiez, H, and Stripf, M (2016):  α-MAX : passive Kühlung einer Ultraschallsonotrode mittels Heat-Pipe. In: Forschung aktuell, pp. 77-80.
  • von Böckh, P, and Stripf, M (2015): Technische Thermodynamik : ein beispielorientiertes Einführungsbuch. Springer, Berlin, https://doi.org/10.1007/978-3-662-46890-6
  • Braun, L, Friedl, F, Schmehl, R, and Stripf, M (2015): Fault-Tolerant and Reliable Design of a Pumping Kite Power System. Energy, Science and Technology, International Conference & Exhibition, 20.-22.05.2015, Karlsruhe.
  • Stripf, M, Wehowski, M, Schmid, C, and Wiebelt, A (2012): Thermomanagement für Hochleistungs-Lithium-Ionen-Batterien. In: ATZ Automobiltech Zeitschrift, Vol. 114(1), pp. 52-57, https://doi.org/10.1365/s35148-012-0248-8
  • Wiebelt, A, Neumeister, D, Stripf, M, Kohlberger, M, and Heckenberger, T (2010): Differenziertes Thermomanagement für die Li-Ionen-Batterie : von der Bestimmung thermischer Zelleigenschaften bis zum Testlauf der Batterie im Klima-System-Prüfstand. 10. Internationales Stuttgarter Symposium, 16.-17.03.2010, Stuttgart.
  • Boyle, RJ, and Stripf, M (2009): Simplified Approach to Predicting Rough Surface Transition. In: Journal of Turbomachinery, Vol. 131(4), pp. 11, https://doi.org/10.1115/1.3072521
  • Stripf, M, Schulz, A, Bauer, H-J, and Wittig, S (2009): Extended Models for Transitional Rough Wall Boundary Layers with Heat Transfer : Part I: Model Formulations. In: Journal of Turbomachinery, Vol. 131(3), https://doi.org/10.1115/1.2992511
  • Stripf, M, Schulz, A, Bauer, H-J, and Wittig, S (2009): Extended Models for Transitional Rough Wall Boundary Layers with Heat Transfer : Part II: Model Validation and Benchmarking. In: Journal of Turbomachinery, Vol. 131(3), https://doi.org/10.1115/1.2992512
  • Stripf, M, Schulz, A, and Bauer, H-J (2008): Modeling of Rough Wall Boundary Layer Transition and Heat Transfer on Turbine Airfoils. In: Journal of Turbomachinery, Vol. 130(2), https://doi.org/10.1115/1.2750675
  • Lorenz, M, Stripf, M, Schulz, A, and Bauer, H-J (2008): External Heat Transfer Measurements on a Turbine Airfoil in a Linear Cascade. In: Proceedings of the 19th International Symposium on Transport Phenomena, 17.-20.08.2008, Reykjavik.
  • Weil, M, Meyer, F, Levi, A, Gallasteg, O, and Stripf, M (2008): Managing Emerging Innovations : CO₂ savings due to application of nano ceramic coating in coal fired power plants. 3rd International Conference on Surfaces, Coatings and Nanostructure Materials (NanoSmat), 21.-24.10.2008, Barcelona, Spanien.
  • Stripf, M, Schulz, A, and Bauer, H-J (2007): Surface Roughness and Secondary Flow Effects on External Heat Transfer of a HP Turbine Vane. In: Journal of Propulsion and Power, Vol. 23(2), pp. 283-291, https://doi.org/10.2514/1.23062
  • Stripf, M, Schulz, A, and Wittig, S (2005): Surface Roughness Effects on External Heat Transfer of a HP Turbine Vane. In: Journal of Turbomachinery, Vol. 127, pp. 200-208, https://doi.org/10.1115/1.1811101

Kontakt

Prof. Dr.-Ing. Matthias Stripf
matthias.stripfspam prevention@h-ka.de
Private Website
http://www.h-ka.de/itfd


Fakultät für Maschinenbau und Mechatronik
Professor für Thermofluiddynamik und effiziente Energiewandlung
Tel.: +49 721 925-1919
1915

Sprechzeiten :
Mi. 9:30 - 10:30 Uhr

Raum M-108


Institut für Thermofluiddynamik
Institutssprecher